ATS01N125FT
Giá: Liên hệ
Mã sản phẩm: ATS01N125FT
Share
| range of product |
Altistart 01
|
|
|---|---|---|
| product or component type |
Soft starter
|
|
| product destination |
Asynchronous motors
|
|
| product specific application |
Simple machine
|
|
| device short name |
ATS01
|
|
| network number of phases |
1 phase
|
|
| [Us] rated supply voltage |
110...480 V - 10...10 %
|
|
| motor power kW |
11 kW, 3 phases at 400 V
3 kW, 3 phases at 230 V 4 kW, 3 phases at 230 V 9 kW, 3 phases at 400 V 7.5 kW, 3 phases at 400 V 5.5 kW, 3 phases at 230 V 2.2 kW, 1 phase at 230 V |
|
| motor power hp |
11 hp, 3 phases at 460 V
2 hp, 3 phases at 210 V 3 hp, 3 phases at 210 V 5 hp, 3 phases at 230 V 9 hp, 3 phases at 460 V 7.5 hp, 3 phases at 230 V |
|
| IcL starter rating |
25 A
|
|
| utilisation category |
AC-53B conforming to EN/IEC 60947-4-2
|
|
| current consumption |
125 A at nominal load
|
|
| type of start |
Start with voltage ramp
|
|
| power dissipation in W |
1 W at full load and at end of starting
126 W in transient state |
| assembly style |
With heat sink
|
|
|---|---|---|
| function available |
Integrated bypass
|
|
| supply voltage limits |
99…528 V
|
|
| supply frequency |
50...60 Hz - 5...5 %
|
|
| network frequency |
47.5...63 Hz
|
|
| output voltage |
<= power supply voltage
|
|
| [Uc] control circuit voltage |
110 V AC +/- 10 % at 35 mA
24 V AC/DC +/- 10 % at 30 mA 240 V AC +/- 10 % at 80 mA |
|
| starting time |
1 s / 100
5 s / 20 Adjustable from 1 to 5 s |
|
| starting torque |
30...80 % of starting torque of motor connected directly on the line supply
|
|
| discrete output current |
2 A DC-13
3 A AC-15 |
|
| tightening torque |
0.5 N.m
1.9…2.5 N.m |
|
| electrical connection |
4 mm screw clamp terminal - rigid 1 1...10 mm² AWG 8 power circuit
Screw connector - rigid 1 0.5...2.5 mm² AWG 14 control circuit 4 mm screw clamp terminal - rigid 2 1...6 mm² AWG 10 power circuit Screw connector - rigid 2 0.5...1 mm² AWG 17 control circuit Screw connector - flexible with cable end 1 0.5...1.5 mm² AWG 16 control circuit 4 mm screw clamp terminal - flexible without cable end 1 1.5...10 mm² AWG 8 power circuit Screw connector - flexible without cable end 1 0.5...2.5 mm² AWG 14 control circuit 4 mm screw clamp terminal - flexible with cable end 2 1...6 mm² AWG 10 power circuit 4 mm screw clamp terminal - flexible without cable end 2 1.5...6 mm² AWG 10 power circuit Screw connector - flexible without cable end 2 0.5...1.5 mm² AWG 16 control circuit |
|
| marking |
CE
|
|
| operating position |
Vertical +/- 10 degree
|
|
| height |
124 mm
|
|
| width |
45 mm
|
|
| depth |
131 mm
|
|
| net weight |
0.35 kg
|
|
| compatibility code |
ATS01N1
|
|
| Motor power range AC-3 |
2.2…3 kW at 200…240 V 3 phases
2.2…3 kW at 200…240 V 1 phase 4…6 kW at 200…240 V 3 phases 7…11 kW at 200…240 V 3 phases 7…11 kW at 380…440 V 3 phases |
|
| motor starter type |
Soft starter
|
| electromagnetic compatibility |
Conducted and radiated emissions level B conforming to CISPR 11
Conducted and radiated emissions level B conforming to IEC 60947-4-2 Damped oscillating waves level 3 conforming to IEC 61000-4-12 Electrostatic discharge level 3 conforming to IEC 61000-4-2 EMC immunity conforming to EN 50082-1 EMC immunity conforming to EN 50082-2 Harmonics conforming to IEC 1000-3-2 Harmonics conforming to IEC 1000-3-4 Immunity to conducted interference caused by radio-electrical fields level 3 conforming to IEC 61000-4-6 Immunity to electrical transients level 4 conforming to IEC 61000-4-4 Immunity to radiated radio-electrical interference level 3 conforming to IEC 61000-4-3 Micro-cuts and voltage fluctuation conforming to IEC 61000-4-11 Voltage/current impulse level 3 conforming to IEC 61000-4-5 |
|
|---|---|---|
| standards |
EN/IEC 60947-4-2
|
|
| product certifications |
B44.1-96/ASME A17.5 for starter wired to the motor delta terminal
C-Tick CCC GOST CSA UL |
|
| IP degree of protection |
IP20
|
|
| pollution degree |
2 conforming to EN/IEC 60947-4-2
|
|
| vibration resistance |
1 gn (f= 13…150 Hz) conforming to EN/IEC 60068-2-6
1.5 mm peak to peak (f= 3…13 Hz) conforming to EN/IEC 60068-2-6 |
|
| shock resistance |
15 gn for 11 ms conforming to EN/IEC 60068-2-27
|
|
| relative humidity |
5…95 % without condensation or dripping water conforming to EN/IEC 60068-2-3
|
|
| ambient air temperature for operation |
-10…40 °C (without)
40…50 °C (with current derating of 2 % per °C) |
|
| ambient air temperature for storage |
-25…70 °C conforming to EN/IEC 60947-4-2
|
|
| operating altitude |
<= 1000 m without
> 1000 m with current derating of 2.2 % per additional 100 m |
| REACh Regulation | ||
|---|---|---|
| REACh free of SVHC |
Yes
|
|
| EU RoHS Directive |
Pro-active compliance (Product out of EU RoHS legal scope)
EU RoHS Declaration |
|
| Toxic heavy metal free |
Yes
|
|
| Mercury free |
Yes
|
|
| RoHS exemption information | ||
| China RoHS Regulation | ||
| Circularity Profile | ||
| WEEE |
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins
|
| Warranty |
18 months
|
|---|
